Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Bryant, AR

Exterior Mold & Mildew Removal for Stucco in Bryant, AR

Soft wash for stucco. Killing and removing mold, mildew and algae from siding, decks, walkways and fences, with treatment that slows regrowth. Typical cost $250-$700.

Exterior Mold & Mildew Removal for Stucco is one of the jobs we do most often in Bryant, AR. Typical jobs cost $250-$700, and you approve the price before we begin. On stucco, the method we use is soft wash.

The right method for the job

Soft washCleaning method
Soft wash only, typically under 500 PSIPressure

Cleaning solution: A diluted house-wash solution with surfactant, given time to dwell, then a gentle rinse.

Cleaning stucco safely

Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots. Hairline cracks are common, and high pressure can force water into them or break off the finish coat.

Avoid: High pressure, which can etch the texture, blow out patches and push water behind the wall.

How often: Every 1-2 years.

Signs you need exterior mold & mildew removal for stucco

  • Black, green or gray spots and film
  • Slippery walkways and decks
  • Musty smell near shaded walls
  • Growth that returns soon after rinsing

Why it gets dirty

  • Shade, humidity and poor air flow
  • Organic debris and pollen
  • Surfaces that stay damp after rain or sprinklers

What you can do yourself

  • Improve sun and air flow by trimming plants
  • Keep gutters and sprinklers from soaking walls
  • Clean small areas with an outdoor mildew cleaner, following the label

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Blasting growth off without killing it, so it grows back fast
  • Mixing cleaning chemicals, which can release toxic gas
  • Damaging plants with runoff

How we handle exterior mold & mildew removal for stucco

  1. Identify surfaces and growth
  2. Protect plants and fixtures
  3. Apply a solution that kills the growth
  4. Rinse at low pressure
  5. Post-treat where helpful to slow regrowth

This service is for outdoor surfaces. Mold inside the home, in attics or in wall cavities needs a mold remediation specialist, not a pressure washing company.

Exterior Mold & Mildew Removal for Stucco cost in Bryant, AR

$250-$700Typical range for typical exterior growth on a home
2-4 hoursTypical time on site
Every 1-2 years in humid or shaded areasRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stucco

Exterior Mold & Mildew Removal for Stucco in Bryant, AR

Mildew and algae are the main reason Arkansas homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.

Spring pollen season in Arkansas coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Besides Bryant (ZIP codes 72022 and 72089), we handle exterior mold & mildew removal for stucco in Alexander (3.6 mi), Salem (4.5 mi), Shannon Hills (5.6 mi) and Benton (6 mi). Call (877) 658-5887 for a free quote in Bryant.

Exterior Mold & Mildew Removal for Stucco: frequently asked questions

How much does exterior mold & mildew removal for stucco cost in Bryant, AR?

Exterior Mold & Mildew Removal for Stucco typically costs $250-$700 for typical exterior growth on a home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.

Do you use high pressure for exterior mold & mildew removal for stucco?

For stucco: soft wash only, typically under 500 PSI. What we avoid: high pressure, which can etch the texture, blow out patches and push water behind the wall. The cleaning solution does most of the work, followed by a gentle rinse.

Is exterior mold & mildew removal for stucco safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule exterior mold & mildew removal for stucco?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Bryant, AR

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Roof Cleaning

Soft wash roof cleaning that removes black streaks, moss and lichen without the granule damage pressure washing causes.

Typical $400-$1,000

Graffiti Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$800

Deck Restoration & Staining for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $800-$2,500

Concrete Sealing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $400-$1,200

Pre-Paint Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$600

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Graffiti Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $200-$800

Sidewalk & Walkway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $100-$250

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Driveway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$400

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Bryant, AR. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote